MCS 1000 Series
PowerUp Menu
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 52 / 76
BeWa MCS1000 3435427f V130 en-us 2012-06-15.doc
2012-06-15
PowerUp Menu
MODE - select operating mode
Function:
Adjustment not possible
Parameters: none
Factory setting:
M2 (Measure and switch)
S.TIME - Set storing interval
Function:
After the time interval set, the total number of particles is
written to the memory of the MCS.
The number of particles within the time intervals can be
seen from the parameter DSPLAY - CYC.
Parameters:
1 - 120 minutes
Factory setting:
60
SEL.COM - Set protocol
Purpose:
Set transfer protocol to the superordinate system
Function:
Adjustment not possible.
Parameters: none
Factory setting:
HSI
ADRESS – Set bus address
Parameters:
A - Z for the HSI bus
Factory setting:
D
DFAULT - Reset to factory setting
Function:
Reset to the factory settings
You can find the factory setting at the corresponding
parameter.
