MCS 1000 Series
Safety information and instructions
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 10 / 76
BeWa MCS1000 3435427f V130 en-us 2012-06-15.doc
2012-06-15
Explanation of Symbols and Warnings, etc.
DANGER
DANGER denotes situations
which can lead to death if
safety precautions are not
observed.
WARNING
WARNING denotes situations
which can lead to death if
safety precautions are not
observed.
CAUTION
CAUTION denotes situations
which can lead to severe
injuries if safety precautions
are not observed.
NOTICE
NOTICE denotes situations
which can lead to property
damage if safety precautions
are not observed.
Proper/Designated Use
The MetallicContamination Sensor (MCS) is used for the continuous monitoring of
particulate contamination in hydraulic and lubrication systems.
Analyzing the size and quantity of contamination enables quality standards to be
verified and documented and the requisite optimization measures to be
implemented.
Any other use shall be deemed to be improper and not in keeping with the product's
designated use.
Proper or designated use of the product extends to the following:
Permanent monitoring of solid particle contamination in hydraulic and lubrication
systems
Observing all the notes contained in these operating instructions
Improper Use
Improper use may result in hazard to life and limb.
Improper use includes:
Improper connection of the MCS voltage and sensor cables
Operation with non-approved fluids.
