manualshive.com logo in svg

HYDAC FILTER SYSTEMS CMP1 0-2 Series, Installation And Maintenance Instructions Manual, Page: 10 / 44

Share
Download
HYDAC FILTER SYSTEMS CMP1 0-2 Series Installation And Maintenance Instructions Manual Download Page 10

 

General Safety Information

 

CMP1000 

en(us) 

Page 10 / 44

MoWa CMP 3528418d en-us 2015-01-06.doc 

2015-01-06

 

Proper/Designated Use 

Use the unit only for the application described in the following. 
The ConditionMonitoring Package CMP is for the continuous monitoring of 
solid particle contamination in hydraulic systems. 
Proper or designated use of the product extends to the following: 

  The unit is only to be used with permissible media. 

  observing all instructions contained in the operating manual. 

  performing inspection and maintenance work. 

 

NOTICE 

Impermissible operating media 

The unit will be destroyed 

►

 

The unit is only to be used with mineral oils or mineral oil-based 

raffinates. 

►

 

Do not filter any caustic or explosive media. 

 

NOTICE 

Highly contaminated fluid 

The pump will become worn out / damaged. 

►

 

For long-term operation, pump only fluid with a maximum 

contamination of ISO 22/20/18 

 
 

Summary of Contents for CMP1 0-2 Series













































Reviews:

No comments