- 39 -
SETUP
ENTER
EXIT
GLOBAL EDIT
Some parameters such as sound effects type etc.are for
entire kit but not for individual pad or external instrument..
You don
’
t need select pad or external instrument in global
edit. During the editing, you can hear results of your set-
ting in real time.
1. ENTER THE GLOBAL EDIT
After entering the Kit Edit item selection window, rotate
the Data knob until
“
Global
”
appears. Then press the EN-
TER button to confirm.
Press the EXIT button to exit and back to the Kit Edit
window.
Kit number
2. SELECT PARAMETER
There are many parameters can be edited.
The first parameter name will appear and blink. Current
parameter data will be shown for your reference. Rotate
the Data knob to select parameter you want to edit.
3. EDIT PARAMETERS
When the parameter is selected and its name blinks, press
the ENTER button to confirm and its current data will blink.
Use the Data knob to change parameter data; then press
the ENTER button to confirm your setting and turn to the
next parameter.
Tip:
If you don
’
t want to change the current setting
of parameter, press the ENTER button to skip it and
turn to the next parameter.
DRUM KIT EDIT
Global
Parameter name
Current parameter data
Reverb SW
Reverb SW
Change the parameter data
SETU P
ENTER
EXIT
Reverb SW
SETUP
ENTER
EXIT
SETUP
ENTER
EXIT
Note:
The new setting is nonvolatile even the power
turns off. You could recover the default setting with
Kit Reset function. Please refer to the Kit Reset sec-
tion of this chapter for more information.
