- 14 -
Light Funk
KIT
DRUM KIT
4. EXTERNAL KIT SELECT
When external instruments are connected, they are played
in voice assigned to the external kit.
Press and hold down the KIT button for 2 seconds, the
external kit number with
“
E
”
prefix will be shown. Default
external kit is E1.
Rotate the Data knob to select an external kit. There are
5 external kits can be selected.
Press the ENTER button to confirm and exit.
Sign of Ext. kit
Chain No. Kit name & No.
prefix
“
C
”
and kit name will be shown on the top row of the
screen. Its corresponding pad kit number will be shown in
the KIT area in the right side of the display. Rotate the
DATA knob to select Chain number..
Press the KIT button again to exit the Chain mode and
convert to normal Kit Selection window.
Tip:
You can assign your favorate kits to chain.
Please refer to the <SYSTEN SETUP> Chapter for
details.
3. USE PEDAL TO SELECT
You could also use foot switch pedal to select kit or Chain
number, if the pedal is connected. Press the pedal, the
kit number will increase by one defaultly. You could set it
for decreasing by one with the Setup function. Please
refer to the <SYSTEM SETUP> Chapter in the manual
for details.
Tip: You can use the pedal as the Data Knob in
many other cases.
KIT
2 Sec.
External 5
Ext. Kit number and name
Pad Kit number
