- 10 -
(1) Power Switch:
Turn On/Off the sound module
Note:
When you turn the power off, do not turn it on immediately. Wait at least five seconds to
turn the power on so that the electronic circuits can properly reset.
(2) Power In Jack:
Plug in the DC cable of the attached adaptor
(3) Line In Jack:
Line In stereo audio input jacks will mix the supplied signal with the internal drum
sound. It can be used to hook up items such as CD players, MP3 player etc.
(4) Line Out Jack:
There is no built-in speaker in the drum. Line Out stereo audio output supplies the
drum output signal to external amplification, such as home stereo, PA system or other stand alone
amplifiers. If you connect with external mono system, stereo/mono adapter is recommended.
(5) Headphone Jack:
The drum has stereo headphone jack. You can play in total silence without
disturbing others in the room by plugging a set of headphones into the sockets.
(6) Expand Trigger Jacks:
Connect external Ride cymbal, Hi-Hat cymbal, Snare, Kick drum and Hi-Hat
control pedal through these jacks.
(7) Foot SW Jack:
Plug in a foot switch pedal. The pedal can be assigned to data plus/minus, Start/
Stop feature for easy operation by the pedal. The default setting is data plus/minus. Please refer to
Overall Setting section of the <SYSTEM SETUP> Chapter for more information.
(8) USB Jack:
The USB connector allows you to connect the drum directly to your computer
’
s USB port.
The USB interface is compatible with Windows XP, Windows Vista, Windows 7 and MAC OSx. The com-
puter will recognize the drum as Audio Device.
(9)
MIDI In/Out Jack:
This drum contains MIDI in and MIDI output ports which allow communication with
other products equipped with MIDI interfaces
BACK PANEL
1
2
3
4
5
6
7
8
9
OUT
IN
MIDI
USB
FOOT SW
HH CTRL
KICK
HI-HAT
SNARE
RIDE
HEADPHONE
L/MONO
R
LINE IN
LI NE OUT
DC
IN
ON/OFF
12V
+
-