- 34 -
DRUM KIT EDIT
2-2 ADJUST VOLUME
The parameter name is
“
Volume A
”
. The range of the
volume is 0 - 127. Rotate the Data knob to change the
volume, then press the ENTER button to confirm.
2-1 ASSIGN THE VOICE
The parameter name is
“
Voice A
”
. Assign voice to the
pad selected. If the layer mode is not
“
Off
”
, this assign-
ment is for the layer A. The range of the voice number is
1 - 914. Rotate the Data knob to select voice, then press
the ENTER button to confirm. Please refer to <VOICE
LIST> in this manual for details.
Mute Surdo
Each pad could be layered so that it has two voice
assignments separately. Also, each layer has mul-
tiple parameters such as volume, pan etc should be
setup separately. These parameters are marked with
”
A
”
,
“
B
”
to identify which layer it belongs to. If the
layer mode is Off, or turn layer off in the Kit Selection
window, only parameters with
“
A
”
mark go into effect.
(2) LAYER A EDIT
1-2 Layer Point - The parameter name is
“
LayerPoint
”
.
This edit item is available when the layer mode selected
is not
“
Off
”
, otherwise it
’
ll be skipped. The range of the
point is 0 - 127. Rotate the Data knob to set the layer
Point, then press the ENTER button to confirm. Please
refer to the LAYER section of the <DRUM KIT> chapter
in this manual for details.
LayerPoint
SETUP
ENTER
EXIT
SETUP
ENTER
EXIT
SETUP
ENTER
EXIT
Volume A
(1) LAYER
1-1 Layer Mode - The parameter name is
“
Layer Mode
”
.
Select layer mode from 01 Off, 02 Mix, 03 Switch, 04
Fade and 05 X.Fade. Rotate the Data knob to select
then press the ENTER button to confirm. If you choose
Off, it
’
ll jump to the voice setting directly; otherwise, con-
tinue to edit the next parameter Layer Point.
Fade
SETU P
ENTER
EXIT
2-3 SET PAN
The parameter name is
“
Pan A
”
. Sound output from this
drum is stereo. This parameter determines the sound
position in stereo pan space. The range of the pan is -64
to 63, 0 represents centre position, -64 represents the
most left and 63 represents the most right position
Rotate the Data knob to change the volume, then press
the ENTER button to confirm.
SETUP
ENTER
EXIT
Pan A