- 37 -
Hi-Hat Pedal
Ride Cymbal Bell
Hi-Hat Open
Snare Head
Hi-Hat Close
Snare Rim 1
Ride Cymbal Bow
Snare Rim 2
Ride Cymbal Edge
Kick Drum
EXTERNAL KIT EDIT
The external kit for expanded instrument is independent
from the pad kit. It is also editable.
1. EXTERNAL EDIT PREPARING
(1) Enter the External Kit Edit
After entering the Kit Edit item selection window, rotate
the Data knob until
“
External
”
appear with the external kit
number with
“
E
”
prefix. Then press the ENTER button to
confirm. Press the EXIT button to exit and back to the Kit
Edit window.
If there is no any external instrument connected ,
“
No
Connect
”
will appear on the display for one second then
back to the Kit Edit window.
(2) Select Parameter
There are many parameters can be edited.
The first parameter name will appear and blink. Current
parameter data will be shown for your reference. Rotate
the Data knob to select parameter you want to edit.
(3) Select an Instrument Part to Edit
Select an instrument by striking it.
Please note that some instruments have two or more parts,
for example, the snare have head, rim1 and rim2 parts;
ride cymbal has head and edge parts etc. Select a part to
be edited by striking relevant part, the icon of this instru-
ment on the display will blink.
Note:
The icon shows selected instrument, but there
is no indicator for part.
Tip:
You can edit multiple parameters for a instru-
ment part by selecting an instrument part then
change the parameter, or you can edit a parameter
for multiple instrument parts by selecting a param-
eter then change the instrument part.
All parts cab be edited are listed below:
DRUM KIT EDIT
Parameter name Kit number
Selected pad
Current parameter data
External
SETU P
ENTER
EXIT
Voice E
Connection mark
Cymbal01
Change parameter data
SETUP
ENTER
EXIT
Cymbal06
SETUP
ENTER
EXIT