- 38 -
2. EDIT PARAMETERS
When the parameter is selected and its name blinks, press
the ENTER button to confirm and its current data will blink.
Use the Data knob to change data; then press the EN-
TER button to confirm your setting and turn to the next
parameter.
Tip:
If you don
’
t want to change the current setting
of an item, press the ENTER button to skip it and
turn to the next parameter.
Tip:
During the editing, you can hear results of
your setting in real time by striking the part under
editing.
The edit items are listed below which are the same as
Pad Kit but with suffix E. The way of editing is the same
as described above for Layer A.
Note:
Tremolo and Phaser will not respond to
voice level. If the current chorus type is Tremolo or
Phaser, this parameter edit will not be effective.
Save?
Parameter
Description
Range
Voice E
Assign voice to the part selected
1 to 914
Volume E
Volume of Voice E
0 to 127
Pan E
Sound position of Voice E in stereo pan space
-64 to 63
Pitch E
Pitch of the voice E
-10 to 10
Reverb E
Level of the reverb effect for the voice E
0 to 127
Chr/Dely E
Level of the Chorus and Delay effects for the voice E
0 to 127
3. COMPLETE THE EXTERNAL KIT EDITING
Press the EXIT button anytime during the editing to
terminate.
If you do not make any change, it
’
ll exit the edit and back
to Kit Edit item select window.
If you made change during the edit, you can save edit
results. External Kit number and
“
Save?
”
will appear. Press
the ENTER button to save; the current kit configuration
will be replaced by your edit results.
Or, press the EXIT button to give up and back to the Kit
Edit item select window.
Rim 2
Rim 1
Mark
For example, select
Snare Rim 2
Instrument under editing
S-Stick01
Parameter data
DRUM KIT EDIT
SETU P
ENTER
EXIT
You may note that there are 3 parts for the Hi-Hat. Strike
the Hi-Hat cymbal without pressing the Hi-Hat control pedal
to select the Hi-Hat Open; strike the Hi-Hat cymbal while
press the Hi-Hat control pedal to bottom to select the Hi-
Hat Close; press the Hi-Hat contrl pedal to bottom but
don
’
t strike the Hi-Hat cymbal to select the Hi-Hat Pedal.
