34
9
Packing List
9.1
Packing list of plasma power source
1.
Plasma power source * 1 set
2.
M16 thread adaptor * 1 set (Not on LGK-120HD)
3.
Ground cable * 1 piece
4.
Hose clamp *6 pieces (2 pieces on LGK-120HD)
5.
Fuse
6.
Copper terminal *3 pieces
7.
Control connector (Only for CNC use)
8.
Hex wrench * 1 piece
9.
Documents: Operation manual * 1 copy, Certificate 1 copy, Guarantee card * 1 copy
9.2
System packing list
1.
Plasma power source
2.
Water cooling unit (Buy separately) (Not on LGK-120HD)
3.
Plasma torch (Buy separately)
10
Maintenance
1
）
Do not use or store the plasma cutting machine under strong sunlight;
2
）
Do not use or store the plasma cutting machine in wet environment;
3
）
Do not cover the plasma cutting machine when working;
4
）
Use and store it in a well ventilated working environment;
5
）
Open and clear inside the machine with dry compressed air, at least once a year, to
clear the dust and metal filing;
6
）
Check the insulation of all cables regularly, repair or change it if any damages;
Check the insulation of all connections inside the machine, tighten it if any loosen;
7
）
Discharge the water and impurities in the filter regularly;
8
）
Clear or change the liquid filter regularly, the recommended period is every 6
months or 300 arc hours. If find there is some impurities on the filter cylinder or
filter net, open the discharge valve on the bottom to clear automatically, if can not
clear well, rotate and remove the cylinder, take out the filter net and clear again, if
the filter net is broken, have to change a new one. (Not on LGK-120HD)
Note: only guaranteed electrician can maintain this machine, and the power have to
be cut when do the maintenances.
