Huvitz HDR-9000, Service Manual

Page: 47 / 66

- 46 -
Select the type of chart device and controller type which is connected to the Digital Refractor.
Then touch the “Proceed” icon on the dialog box. The chart type should also be identical to that of
chart device.
The option list is consisted depending on the chart device type selected in the first step. For
example, if CDC-4000 is selected for chart device, option list in this step would not include CN
and R type as CDC-4000 does not support these types.
(4) Setting whether to use PC interaction or not
Select whether to interface the Digital Refractor with PC or not. PC interface is provided by a
special option package named HDRMate. Then touch the “Proceed” icon on the dialog box.
Setting it to YES would turn on transferring examination result to PC via HDRMate
communication package.
(5) Checking and saving the results
This final step is to confirm the results from previous steps and to save the results. If you’re sure
all the information selected for system parameters are correct, touch the “SAVE” button on the
display. Otherwise touch the “EXIT” button – this will trigger the initial setup wizard again when
the system is turned on next time.
It’s also possible to reconfigure the system parameters in “System Settings” menu without
the aid of the initial setup wizard.