- 33 -
(2)
Check the connection and turn on the Digital Refractor. If it has no problem during its
initialization sequence, proceeds to the next cleaning procedure.
(3)
Execute the Engineer Menu mode on the Operation Panel. Refer to appendix for
detailed information about entering and operating functions of Engineer Menu mode.
(4)
Execute the Lens Check function in the Engineer Menu mode. Refer to appendix for detailed
information about operating Lens Check function.
(5)
Insert lenses one by one and clean it both the front and the rear side by using alcohol swabs
with a handle. While cleaning lenses, touch the lenses softly with care so that they don’t fall off
from lens disks.
(6)
After completing cleaning lenses, turn off the power and assemble the cover glasses to the test
window.
Summary of Contents for HDR-9000
