Huvitz HDR-9000, Service Manual

Page: 11 / 66

- 10 -
②
Procedure
To begin the aging test, press the following key sequences on the Operation Panel.

ALT + MENU

ALT + START

ALT + NEXT
3.2.2 Post Aging Test Procedures for the Refractor Body
①
Check the PD adjustment function.

Press PD button.

Check if the PD-check lenses are inserted properly.

Turn the dial clockwise or counter-clockwise several times.

Press PD button again to finish this step.
②
Check the convergence function.

Press FAR and NEAR button on the display several times.

Check if the Refractor Body is converging correctly.

Stop this step when the HDR-9000 Refractor Body is in FAR mode.
③
Check the initialization sequences again.

Turn off the power.

Turn on the power again.

Check if the disk plates in the Refractor Body are aligned properly after the initialization
sequences.

Repeat this step 3 to 5 times.
④
Check the auxiliary lenses.

To enter the lens-checking mode, press the following key sequences.
ALT + MENU
ALT + START
ALT + TEST
"Check Lens"

Change the selection of eye to binocular:
By pressing the OU button.