Huvema HU 440 DGH, Operation Manual

Page: 26 / 37

-25-
6 guide washers support 2HU40336 21 fixed guide guard 2HU40546
7 DIN 912 M8x25 (with groove)
screw 2HU4T336 22 ø5.25x10 elastic pin
8 DIN 471 ø8 ring 23 bridge strap
9 B12.5 (22) Belleville washers 2HU4MU26 24 DIN 912 M5x15 screw
10 DIN 7991 M5x15 screw 25 45º coolant spout
11 bearing separator 26 straight coolant spout
12 6000 ZZ vertical guide bearing 2HU4R046 27 shavings brush support 2HU40596
13 DIN 912 M10x50 (-5) screw 28 shavings cleaner brush 2HU4C596
14 long eccentric bolt 2HU4L586 29 M10 washer
15 short eccentric bolt 2HU4C586 30 M10 nut
Our products are frequently updated and improved. Minor changes may not yet be incorporated in this manual. Always state the year of
build, type and serial number of the machine in correspondence.
Manufacturer and importer assume no responsibility for defects which result from not reading the manual carefully or wrong use of the
machine. No rights can be derived from this manual.
All rights reserved. No part of this booklet may be reproduced in any form, by print, photoprint, microfilm or any other means without
written permission from the publisher.
© 2002, Huberts bv, Kennedylaan 14, Veghel, the Netherlands.
Internet: www.huvema.nl