MK/MV – Medium Profile Series Unit Coolers (E206993_M)
42
9.3 CONNECTIVITY (ENABLING SMART ACCESS SETUP)
Following are the three connection methods to the KE2 Evap OEM controller:
a.
Establish a connection between KE2 Standard Remote Display w/cable (Part number: 21232) to the
display connector on the board.
b.
Establish a LAN point to point connection using CAT5 cable from PC/Laptop to ethernet connector
on the board.
c.
Browse for the controller on the web, using dynamic IP address allocated (KE2 controller must be
connected to the customer network and DHCP must be enabled in the settings).
Figure 23 CONNECTORS ON KE2 EVAP OEM
9.3.1 KE2 STANDARD REMOTE DISPLAY INTERFACE
9.3.1.1 Navigating Basic and Advanced Menus
Please use the following information to navigate
Basic Setpoints Menu
and
Advanced Setpoints
Menu
.
9.3.1.2 Navigating Variables Menu
From the default display, pressing the
up
and
down
arrows will cycle through the
Variables Menu
.
The
Enter
button will toggle between the variable name and value.