Hussmann HGM-1 BS, Installation & Operation Manual

Page: 68 / 70

99-18258-I002_A 5/18/2010
15
OPTIONAL CONFIGURATION WITH FULL-POWER ENDS and SINGLE-FIXTURE DRIVER
END
MULL MULL MULL END
16 GA BLU/WHT
16 GA WHT/BLU
LIGHT, 120- 240 VAC
WHT/BLU
BLU/WHT WHT/BLU
BLU/WHT
-0004 (4 - DOOR)
BLK BLK RED BLK
RED BLK
BLK BLK
RED BLK
BLK BLK
RED BLK
BLK BLK
BLK BLK
RED BLK
BLU/WHT
WHT/BLU
BLU/WHT
WHT/BLU
BLU/WHT
WHT/BLU
DETAILED RETROFIT INSTRUCTIONS FOR ANTHONY 401D,
1KDR, ELS, Ardco and Hussmann FRAMES
Optimax2 Retrofit Instructions for Anthony 401D and
1KDR with ELS Option
Ardco Frame
Hussmann Frame Refer to 99-18258-I001_A Optiplex2 Retrofit
Instructions (Web Use) found on
www.Anthonyintl.com
LED CLEANING INSTRUCTIONS
• The LED light may be dusted as needed with a dry, clean, soft cloth.
• The outer lens should be cleaned periodically with a mild dish detergent.
• Do not use chemical cleaners to clean the system.
• Keep the outside clean. Wipe with a clean cloth lightly damped with mild dish washer detergent. Dry with a clean,
soft cloth
• Do not wipe the lens with a soiled dish cloth or wet towel. These may leave a residue that can damage the finish.
• Do not use scouring pads, powered cleaners, bleach or cleaners containing bleach because these products can
scratch and damage the finish.