99-16105-S001_A
5/20/2010
Instuctions
14
1.
Using a flat-head screwdriver, loosen the torquemaster from its mount by turning the center mounting screw
counter-clockwise less than one-half (1/2) of a turn.
Refer to figure
(A)
Remove the Torquemaster, exposing the
mounting hole in the bottom frame rail.
Refer to figure
(B)
2.
Locate the mounting hole at the opposite side of the door opening.
3.
Using the flat-head screwdriver, carefully pry underneath the plug cap and remove it.
Refer to figure
(C)
4.
Place the Torquemaster on the newly opened mounting hole, aligning the flanged corners of the mounting tabs
Refer to figure
(D)
5.
Insert the Torquemaster mounting tabs onto the mounting hole with the hollow end of the Torquemaster against
the door frame.
A
B
C
D
Summary of Contents for HGM-1 BS
Page 2: ......
Page 4: ......
Page 70: ...Hussmann Corporation 12999 St Charles Rock Road Bridgeton MO 63044 2483 www hussmann com...
