P/N 0518258_D
1-3
Produce & Bakery
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
Medium Temperature
P/N 0518258_C
1-3
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Prep Case
1. Check to be sure that merchan-
disers are level and that the
factory-installed nut retainers
and alignment pins are in
place. Locate Joint Kit and
check contents against parts
list.
2. Remove shelves (if installed),
display racks, pans, front shelf
supports and front air grilles
from the right end.
3. Remove the rear panel(s) from
the right end. On multi-deck
cases remove the lower back
panel first. To remove a panel
lift it up from its bottom edge
and out. No tools are required.
Apply Gaskets
1. Apply
1
/
2
in. (13 mm) gasket in
the horizontal recess across the
bottom and up the front of the
merchandiser as shown. Gasket
should cover slots.
2. Apply the 1
5
/
8
in. (41 mm) gas-
ket to cover foam-to-metal gap
at rear of case and across the
top as shown. Be sure to over-
lap gaskets as shown. Check to
be sure that there are no gaps
between gasket and merchan-
diser.
Levels
Levels
Rear
Serial Plate
Front of
Merchandiser
Leveling Wide Island
Merchandisers
Leveling Single Deck
Merchandisers
NOTE:
Do not place levels
on Display Pans or
on Shelves.