P/N 3053878_B 5-1
Roll-In
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
CARE AND CLEANING
Long life and satisfactory performance of any
equipment is dependent upon the care it receives.
To ensure long life, proper sanitation and minimum
maintenance costs, these merchandisers should be
thoroughly cleaned, all debris removed and the
interiors washed down, weekly.
Fan Plenum
The fan plenum is located behind the interior back
panels. Remove the back panels to get access to the
fans.
Glass Doors
Wipe inside of glass with isopropyl alcohol and a soft
cloth. Allow surface to dry before closing door. Use
of other cleaners or abrasives may damage the surface,
and/or void the warranty. Refer to manual that ships
with doors.
Interior Surfaces
The interior surfaces may be cleaned with most
domestic detergents, ammonia based cleaners and
sanitizing solutions with no harm to the surface.
Exterior Surfaces
The exterior surfaces should be cleaned with a mild
detergent and warm water to protect and maintain
their attractive finish.
n
ever
use
abrasive
cleansers
or
scouring
pads
.
D
o
N
ot
U
se
:
• Abrasive cleansers and scouring pads, as these will
mar the finish.
• Coarse paper towels on coated glass.
• Ammonia-based cleaners on acrylic parts.
• Solvent, oil or acidic based cleaners on any interior
surfaces.
D
o
U
se
:
• Remove the product and all loose debris to avoid
clogging the waste outlet.
• Store product in a refrigerated area such as a
freezer. Remove only as much product as can be
taken to the freezer in a timely manner.
• First turn off refrigeration, then disconnect
electrical power.
• Thoroughly clean all surfaces with soap and hot
water.
D
o
not
Use
steam
or
high
water
pressUre
hoses
to
wash
the
interior
.
T
hese
will
desTroy
The
merchandisers
’
sealing
causing
leaks
and
poor
performance
.
• The fan plenum is located behind the interior back
panels. The plenum should be cleaned regularly
according to store environment conditions.
• Take care to minimize direct contact between fan
motors and cleaning or rinse water.
• Rinse with hot water, but do NOT flood.
n
ever
introDUce
water
faster
than
the
waste
oUtlet
can
remove
it
.
• Allow merchandisers to dry before resuming
operation.
• After cleaning is completed, turn on power and
refrigerant to the merchandiser.
• Verify that merchandiser is working properly.
MAINTENANCE
Do NOT use HOT water on COLD glass surfaces.
This can cause the glass to shatter and could
result in personal injury. Allow glass fronts,
ends and service doors to warm before applying
hot water.
SHUT FANS OFF DURING CLEANING
PROCESS.
