2-10
e
lectrIcal
/ c
ontroller
/ W
ater
/ r
efrIgeratIon
P/N3053878_B
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • WWW.HUSSMANN.COM
60
Remote Display Connection for Hussmann Case Display remote terminal (Vnr)
61
Remote Display Connection for Hussmann Case Display remote terminal (+)
62
Remote Display Connection for Hussmann Case Display remote terminal (-)
63
RS485 Slave
RS485 Slave connection (-)
64
RS485 Slave
RS485 Slave connection (+)
65
LAN
LAN Connection (-)
66
LAN
LAN Connection (+)
Network Connector
Hussmann Controller Display, maximum 1 terminal per Core
L
ink
RS485 Slave connector
Serial port (LAN or RS485)
First Power
The Corelink case controller requires roughly 45
seconds to boot before any regulation will
begin. At the end of the boot cycle you will
probably notice the case lights will illuminate
and cases equipped with night curtains will
open to the default position.
Micro-Distributed Operation
The zones are controlled by a combination of
Air Discharge
sensors. These sensors are used
to regulate refrigeration around Se
Deadband. The average of those sensors will
call compressors ON/OFF together. Additional
time delays are incorporate to stage
compressors.
Application
All parameters are accessible from the
controllers website or BAS system. To review
settings or make adjustments please refer to
the connection methods listed in this manual.
NO display is provided at the case unless opt.
Refrigeration
Users can find typical settings in the
refrigeration menu of website. Case temp can
be adjusted from here.
Defrost
Corelink will manage defrost per its own defrost
schedule or from external source such as BAS
system for defrost coordination. Users can find
typical settings in the defrost menu of website.
First Power
The CoreLink case controller requires roughly
45 seconds to boot before any regulation will begin.
At the end of the boot cycle you will probably notice
the case lights will illuminate and cases equipped with
night curtains will open to the default position.
Micro-Distributed Operation
The zones are controlled by a combination of Air
Discharge sensors. These sensors are used to regulate
refrigeration around Se Deadband. The
average of those sensors will call compressors ON/OFF
together. Additional time delays are incorporate to
stage compressors.
Application
All parameters are accessible from the controllers
website or BAS system. To review settings or make
adjustments please refer to the connection methods
listed in this manual.
NO display is provided at the case unless opt.
Refrigeration
Users can find typical settings in the refrigeration menu
of website. Case temp can be adjusted from here.
Defrost
CoreLink will manage defrost per its own defrost
schedule or from external source such as BAS system for
defrost coordination. Users can find typical settings in
the defrost menu of website.
