26
2
1
3
5
6
4
7
8
9
1.
67$576723
Press this button to start or stop the machine sewing or
embroidering when you are not using the foot control. Press
67$576723WREHJLQDQGSUHVVDJDLQWRVWRS
Your machine stops automatically at color changes and when
WKHHPEURLGHU\LVÀQLVKHG
2. STOP (MONOCHROME)
IN SEWING MODE:
6723LVXVHGWRFRQFOXGHDVWLWFKRUWRVHZ
MXVWRQHXQLWRI WKHVWLWFK<RXUVHZLQJPDFKLQHWLHVRII WKH
thread and stops automatically when one stitch unit or stitch
SURJUDPKDVEHHQFRPSOHWHG7KH/('QH[WWRWKHEXWWRQLV
OLWZKHQ6723LVDFWLYDWHG6HOHFW6723DJDLQWRFDQFHORUE\
VHOHFWLQJDQHZVWLWFK7KH6723IXQFWLRQLVFDQFHOOHGZKHQ
the stitch is completed. Press the button again if you wish to
DFWLYDWHLWRQFHPRUH
6723LVDOVRXVHGWRUHSHDWWKHGDUQLQJRUEDUWDFNVWLWFKZLWK
the same size.
7KH6723IXQFWLRQFDQEHSURJUDPPHGVHHSDJH
Tip: If you want to repeat the STOP function for a stitch unit several
times in a row you can save the stitch with a STOP at the end in a
program (see programming, page 40).
IN EMBROIDERY MODE:
:KHQHPEURLGHULQJ6723LV
DXWRPDWLFDOO\DFWLYDWHGDQGWKHPDFKLQHVWRSVDWFRORUFKDQJHV
'HVHOHFW6723WRHOLPLQDWHVWRSVIRUFRORUFKDQJHVWRFUHDWH
PRQRFKURPHHPEURLGHU\VHHSDJH7KH/('QH[WWRWKH
EXWWRQLVOLWZKHQ6723LVDFWLYDWHG
3. FIX (BASTE)
IN SEWING MODE:
FIX is used to tie off a stitch. FIX is
DXWRPDWLFDOO\DFWLYDWHGZKHQ\RXVHOHFWDVWLWFKXVHWKH
6HOHFWLYH7KUHDG&XWWHURUXVH6723ZKLOH\RXDUHVHZLQJ
$WWKHEHJLQQLQJ\RXUPDFKLQHVHZVDIHZWLHRII VWLWFKHV
and continues with the selected stitch. Press FIX while sewing
and your machine sews a few tie-off stitches and stops
DXWRPDWLFDOO\7KH/('QH[WWRWKHEXWWRQLVOLWZKHQ),;LV
DFWLYH3UHVVWKH),;EXWWRQWRWXUQWKHIXQFWLRQRII7KH),;
function can be programmed, see page 40.
Note: FIX Auto can be cancelled in the SET Menu (see page 31). No
automatic FIX stitches will be sewn unless you use the FIX button on
your machine.
IN EMBROIDERY MODE:
Press FIX to baste an outline of the
embroidery design area or to baste the fabric to the stabilizer.
4. SELECTIVE THREAD CUTTER
IN SEWING MODE:
3UHVVWKH6HOHFWLYH7KUHDG&XWWHUEXWWRQ
and your machine ties off the threads, cuts the top and bobbin
WKUHDGVUDLVHVWKHSUHVVHUIRRWDQGWKHQHHGOHDQGDFWLYDWHVWKH
FIX function for the next start. To cut threads at the end of
DVWLWFKRUVWLWFKSURJUDPSUHVV6HOHFWLYH7KUHDG&XWWHUZKLOH
sewing.
7KH/('QH[WWRWKHEXWWRQVWDUWVÁDVKLQJLQGLFDWLQJ
WKDWDFXWLVUHTXHVWHG
When the stitch or stitch program is
completed, the machine willl make a FIX and then cut the
XSSHUWKUHDGDQGEREELQWKUHDG7KH6HOHFWLYH7KUHDG&XWWHU
function can be programmed, see page 40.
Note: Your machine cuts the threads automatically after certain stitches
such as completing a Sensor One Step Buttonhole. Selective Thread
Cutter Auto can be cancelled in the SET Menu, see page 31.
IN EMBROIDERY MODE:
,I \RXSUHVVWKH6HOHFWLYH7KUHDG
Cutter while embroidering it automatically cuts the top and
EREELQWKUHDGVDQGUDLVHVWKHSUHVVHUIRRW$WWKHHQGRI D
color block only the top thread is cut. When the design is
ÀQLVKHGERWKWRSDQGEREELQWKUHDGVDUHFXWDXWRPDWLFDO
ly.
Note: Selective Thread Cutter Auto can be cancelled in the SET Menu,
see page 31.
5.
1(('/(672383'2:1
TRIM POSITION)
IN SEWING MODE:
3UHVVWKH1HHGOH6WRS8S'RZQWRPRYH
the needle up or down. The setting of the needle stop position
is changed at the same time.
$QDUURZSRLQWLQJXSRUGRZQ
QH[WWRWKHQHHGOHRQWKH*UDSKLF'LVSOD\LQGLFDWHVLI 1HHGOH
6WRS8SRU1HHGOH6WRS'RZQLVVHOHFWHG
You can also tap the foot control to raise or lower the needle.
If both the needle and the presser foot are in up position, only
the presser foot will be lowered when you tap the foot control
WKHÀUVWWLPH7DSDJDLQWRORZHUWKHQHHGOHDVZHOO
FUNCTION BUTTONS
(PEURLGHU\0RGHIXQFWLRQVDUHLQEUDFNHWV
