C
A
B
C
D
D
18
WINDING THE BOBBIN WITH
THE MACHINE THREADED
0DNHVXUHWKDWWKHSUHVVHUIRRWLVXSDQGWKHQHHGOHLVLQWKH
highest position.
Note! Do not use a plastic presser foot when bobbin winding.
1. Place an empty bobbin on the bobbin spindle on the top
of the machine. The
EREELQRQO\ÀWVRQRQHZD\ZLWK
WKHORJRIDFLQJXS8VHRQO\R8649$51$
9,.,1*
®
bobbins.
2. Pull the thread from the needle under the presser foot and
WRWKHULJKWWKURXJKWKHWKUHDGJXLGH&
*XLGHWKHWKUHDGWKURXJKWKHKROHLQWKHEREELQ'IURP
the inside to the outside.
Note: When using an earlier version of HUSQVARNA VIKING
®
bobbins that do not have a hole, wind several turns of thread on the
bobbin to get started.
3XVKWKHEREELQVSLQGOHWRWKHULJKW$SRSXSPHVVDJH
DSSHDUVRQWKH*UDSKLF'LVSOD\+ROGWKHHQGRI WKH
WKUHDGÀUPO\ZKHQVWDUWLQJWRZLQG3UHVVWKHIRRWFRQWURO
WRVWDUWZLQGLQJ2QFHWKHEREELQEHJLQVWRZLQGFXWWKH
excess thread. When the bobbin is full it will stop rotating.
Release the foot control. Push the bobbin spindle back to
WKHOHIWUHPRYHWKHEREELQDQGFXWRII WKHWKUHDGRQWKH
thread cutter.
WINDING THE BOBBIN USING
THE VERTICAL SPOOL PIN
1. Place an empty bobbin on the bobbin spindle on the top
RI WKHPDFKLQH7KHEREELQRQO\ÀWVRQRQHZD\ZLWK
WKHORJRIDFLQJXS8VHRQO\R8649$51$
9,.,1*
®
bobbins.
2. Place the large spool cap and a felt pad under the spool on
WKHPDLQVSRROSLQVHWLQWKHYHUWLFDOSRVLWLRQ
%ULQJWKHWKUHDGRYHUDQGEHKLQGWKHSUHWHQVLRQWKUHDG
JXLGH$DQGGRZQDURXQGWKHWKUHDGWHQVLRQGLVF%
WKHQWKURXJKWKUHDGJXLGH&DVLOOXVWUDWHG
*XLGHWKHWKUHDGWKURXJKWKHKROHLQWKHEREELQ'IURP
the inside to the outside.
3XVKWKHEREELQVSLQGOHWRWKHULJKW$SRSXSPHVVDJH
DSSHDUVRQWKH*UDSKLF'LVSOD\+ROGWKHHQGRI WKH
WKUHDGÀUPO\ZKHQVWDUWLQJWRZLQG3UHVVWKHIRRWFRQWURO
WRVWDUWZLQGLQJ2QFHWKHEREELQEHJLQVWRZLQGFXWWKH
excess thread. When the bobbin is full it will stop rotating.
Release the foot control. Push the bobbin spindle back to
WKHOHIWUHPRYHWKHEREELQDQGFXWRII WKHWKUHDGRQWKH
thread cutter.
Note: When using an earlier version of HUSQVARNA VIKING
®
bobbins that do not have a hole, wind several turns of thread clockwise
on the bobbin to get started.