Husqvarna TC 85 2020, Owner'S Manual

Page: 59 / 136

SERVICE WORK ON THE CHASSIS 11
57
11.17 Installing front fender
A00138-10
Main work
–
Position front fender.
–
Mount and tighten screws
1
.
Guideline
Screw, front fender M6 6 Nm (4.4 lbf ft)
–
Mount and tighten screws
2
.
Guideline
Screw, front fender M6 6 Nm (4.4 lbf ft)
Finishing work
–
Install the start number plate. ( p. 55)
11.18 Removing the shock absorber
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 46)
V01289-10
Main work
–
Detach brake line from the brake line guide.
–
Remove screw
1
and lower the rear wheel with the link fork
as far as possible without blocking the rear wheel. Secure the
rear wheel in this position.
–
Remove screw
2
, push splash protector
3
to the side,
and remove the shock absorber.
11.19 Installing the shock absorber
V01289-11
Main work
–
Push splash protector
1
to the side and position the shock
absorber. Mount and tighten screw
2
.
Guideline
Screw, top
shock absorber M12 60 Nm (44.3 lbf ft)
Loctite
®
2701™
–
Mount and tighten screw
3
.
Guideline
Screw, bottom
shock absorber M12 60 Nm (44.3 lbf ft)
Loctite
®
2701™
–
Attach brake line.