Husqvarna TC 85 2020 Page 39 Owner'S Manual Download

Page: 39 / 136

TUNING THE CHASSIS 10

10.5

Adjusting the high-speed compression damping of the shock absorber

Caution

Risk of injury

Parts of the shock absorber will move around if the shock absorber is detached incor-

rectly.
The shock absorber is filled with highly compressed nitrogen.

–

Please follow the description provided. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)

Info

The effect of the high-speed setting can be seen in fast compression of the shock absorber.

K00977-10

–

Turn adjusting screw

clockwise all the way.

Info

Do not loosen fitting

–

Turn counterclockwise by the number of turns corresponding
to the shock absorber type.
Guideline

High-speed compression damping

Comfort

1.5 turns

Standard

2 turns

Sport

2.5 turns

Info

Turn clockwise to increase the damping; turn counter-
clockwise to reduce the damping.

10.6

Adjusting the rebound damping of the shock absorber

Caution

Risk of injury

Parts of the shock absorber will move around if the shock absorber is detached incor-

rectly.
The shock absorber is filled with highly compressed nitrogen.

–

Please follow the description provided. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)

K00960-10

–

Turn adjusting screw

clockwise up to the last perceptible

click.

–

Turn counterclockwise by the number of clicks correspond-
ing to the shock absorber type.

Summary of Contents for TC 85 2020









































































































































Search results

Summary of Contents for TC 85 2020

Reviews:

Related manuals for TC 85 2020

Brands by name

Popular brands

Husqvarna TC 85 2020, Owner'S Manual

Search results

Summary of Contents for TC 85 2020

Reviews:

Related manuals for TC 85 2020

Brands by name

Popular brands