Husqvarna TC 85 2020, Owner'S Manual

Page: 28 / 136

7 PREPARING FOR USE
26
7.6 Preparing vehicle for rides on wet and muddy circuits
–
Make sure that no radiator covers ( p. 94) are installed.
M01107-01
–
Adjust the carburetor jetting and setting.
Info
The recommended carburetor tuning is available from
your authorized Husqvarna Motorcycles workshop.
–
Clean the motorcycle. ( p. 111)
–
Straighten bent radiator fins carefully.
7.7 Preparing vehicle for high temperatures or slow riding
–
Make sure that no radiator covers ( p. 94) are installed.
V00814-01
–
Check the radiator cap.
Value on the radiator cap 1.8 bar (26 psi)
» If the indicated value does not correspond to the setpoint
value:
Warning
Danger of scalding
During motorcycle
operation, the coolant gets very hot and is
under pressure.
–
Do not open the radiator, the radiator
hoses or other cooling system compo-
nents if the engine or the cooling system
are at operating temperature.
–
Allow the cooling system and the engine
to cool down before you open the radiator,
the radiator hoses or other components of
the cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
–
Change the radiator cap.
600868-01
–
Adjust the secondary drive to the road conditions.
Info
The engine oil heats up quickly when the clutch is
operated frequently due to an excessively high sec-
ondary ratio.
–
Clean the radiator fins.
–
Straighten the bent radiator fins carefully.
–
Check the coolant level. ( p. 97)