Husqvarna TC 85 2020, Owner'S Manual

Page: 52 / 136

11 SERVICE WORK ON THE CHASSIS
50
11.8 Installing the fork protector
A00141-10
–
Position the fork protector on the right fork leg. Mount and
tighten screws
1
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Position the fork protector on the left fork leg. Mount and
tighten screws
2
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line and clamp. Mount and tighten
screws
3
.
11.9 Removing the lower triple clamp
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 46)
–
Remove the front wheel. ( p. 88)
–
Remove the fork legs. ( p. 47)
–
Remove the start number plate. ( p. 55)
–
Remove front fender. ( p. 56)
–
Remove the handlebar cushion.
S03429-10
Main work
–
Pull fuel tank breather
1
out of the steering stem.
–
Loosen screw
2
. Remove nut
3
, pull off the upper triple
clamp with the handlebar in an upward direction, and hang it
to the side.
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
S03430-10
–
Remove protective ring
4
.
–
Take off the lower triple clamp with the steering stem in a
downward direction.
–
Remove the upper steering head bearing.