Husqvarna TC 85 2020, Owner'S Manual

Page: 51 / 136

SERVICE WORK ON THE CHASSIS 11
49
A00152-12
–
Clean and grease the wheel spindle.
Long-life grease ( p. 127)
–
Position front wheel.
–
Insert the wheel spindle.
–
Mount and tighten screw
5
.
Guideline
Screw, front wheel
spindle M20x1.5 35 Nm (25.8 lbf ft)
M01563-10
–
Position the brake caliper with the spacers.
–
Mount screws
6
, but do not tighten yet.
Guideline
Screw, front
brake caliper M8 25 Nm (18.4 lbf ft)
Loctite
®
243™
–
Position the brake line and the clamp. Mount and tighten
screws
7
.
–
Operate the hand brake lever several times until the brake
linings are seated correctly against the brake disc. Secure the
hand brake lever in the activated position.
The brake caliper straightens.
–
Tighten screws
6
.
Guideline
Screw, front
brake caliper M8 25 Nm (18.4 lbf ft)
Loctite
®
243™
–
Remove the locking piece of the hand brake lever.
–
Remove the motorcycle from the lift stand. ( p. 46)
–
Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
Tighten screws
8
.
Guideline
Screw, fork stub M8 15 Nm (11.1 lbf ft)
11.7 Removing the fork protector
A00140-10
–
Remove screws
1
and take off the clamp.
–
Remove screws
2
on the left fork leg. Take off the fork pro-
tector.
–
Remove screws
3
on the right fork leg. Take off the fork
protector.