Husqvarna Quilt Designer II, User Manual

Page: 55 / 82

Quilting with Quilt Designer II
55
Illustration O
Illustration P
Illustration O
To sew a mitered seam where the two pieces of
binding meet, fold the ends diagonally where they
meet and press.
Illustration P
Pin together along the fold lines and stitch,
be ing careful not to catch the quilt in this seam. Trim
off excess binding.
Illustration Q
Turn the binding to the right side and pin in place.
Tuck excess fabric at the corners into a miter. Use
presser foot A and stitch A
1
02 or the optional Edge/
Joining Foot and stitch A
1
03 and stitch the binding in
place from the right side of the quilt.
To label the quilt with your name, the name of
the quilt, date, and other information, use the
programmable letters and numbers on stitch
d-Card O
1
. Use the programmable letters on your
Husqvarna Viking. See programming letters and
stitches on page 65.
Illustration Q