Husqvarna Quilt Designer II, User Manual

Page: 14 / 82

Learn your Quilt Designer II
14
A B
C
D
E H
J
R
Presser Feet
Among the accessories there are a number of pres ser
feet for different purposes.
Presser Foot A
Fitted on the machine upon delivery. This foot is
used mainly for straight stitching and zigzag stitch ing
with a stitch length longer than 1.0.
Presser Foot B
When sewing close zigzag stitches with less than 1.0
mm stitch length; other utility stitches or dec o ra tive
stitches use this foot. The tunnel at the bot tom of the
foot is de sig ned to feed smooth ly over the stitches.
Presser Foot C
This is the buttonhole foot and it has guide lines to
determine buttonhole length. The middle mark gives
a 9/16'' (15 mm) buttoning edge. The two tun nels
on the bottom of the foot feed smooth ly and straight
over the buttonhole col umns.
Presser Foot D
This foot is used for blind hem stitches. The in ner
edge of this foot guides the fabric. The bot tom of the
foot is de sig ned to ride along the hem edge.
Presser Foot E
This is the zipper foot and can be snapped on ei ther
to the right or to the left of the needle. This makes it
easy to sew on both sides of the zip per.
Presser Foot H
This foot with a glide plate underneath, is used when
sewing foam, plastic, or leather, min i miz ing the risk
of these materials sticking to the foot.
Presser Foot J
This foot is used for overcasting, seam and
over cas ting, i.e. stitches which have a stitch width
of 5.0 and 5.5 mm. Stitches form over the pin which
prevents pucke ring at the edge of the fabric.
Presser foot P
This foot is used when piecing quilt blocks. The foot
has distance marks 1/4" (6 mm) and 1/8" (3 mm).
Presser Foot R
This foot is used for free motion embroidery,
decorative sewing and embroidery.
P