Husqvarna HH 163MP, Operator'S Manual

Page: 18 / 60

HH 163MP HH 196MP HH 196OB HH 212OB
Oil tank capacity, l 0.6 0.6 0.6 0.6
Engine oil
SAE 10W-30, API
Class SE or SF, for
general use
SAE 10W-30, API
Class SE or SF, for
general use
SAE 10W-30, API
Class SE or SF, for
general use
SAE 10W-30, API
Class SE or SF, for
general use
Sensor for low oil level No Yes No No
Spark plug type F7TC or equivalent F7TC or equivalent F7TC or equivalent F7TC or equivalent
Electrode gap, mm 0.7–0.8 0.7–0.8 0.7–0.8 0.7–0.8
Dimensions, L×W×H, mm 312×362×335 312×362×335 312×362×335 320×350×340
Net weight, kg 15 16 16 14.7
HH 270MP HH 270OB HH 389MP HH 389OB
Engine type
Single cylinder, 4-
stroke, forced air
cooling, OHV
Single cylinder, 4-
stroke, forced air
cooling, OHV
Single cylinder, 4-
stroke, forced air
cooling, OHV
Single cylinder, 4-
stroke, forced air
cooling, OHV
Engine power, kW/hp @rpm
2
6.0/8.0 @3600 6.0/8.0 @3600 8.2/11.0 @3600 8.2/11.0 @3600
Max. torque, Nm/rpm 17.7/2500 17.7/2500 25.1/2500 25.1/2500
Fuel consumption, g/kWh ≤374 ≤374 ≤374 ≤374
Idle speed 1800 ±150 1800 ±150 1800 ±150 1800 ±150
Speed fluctuation ratio, % ≤10 ≤10 ≤10 ≤10
Noise, ≤ db(A) 80 80 80 80
Bore×stroke, mm 77×58 77×58 88×64 88×64
Displacement, cm
3
270 270 389 389
Compression ratio 8:2:1 8:2:1 8:1 8:1
Lubrication mode Splash Splash Splash Splash
Starter Recoil start Recoil start Recoil start Recoil start
Rotation Counterclockwise
from P.T.O. side
Counterclockwise
from P.T.O. side
Counterclockwise
from P.T.O. side
Counterclockwise
from P.T.O. side
Input valve clearance, mm 0.10–0.15 0.10–0.15 0.10–0.15 0.10–0.15
Output valve clearance, mm 0.15–0.20 0.15–0.20 0.15–0.20 0.15–0.20
Ignition mode Transistorized
magneto ignition
Transistorized
magneto ignition
Transistorized
magneto ignition
Transistorized
magneto ignition
Air filter Dual-element air fil-
ter
Foam filter element Dual-element air fil-
ter
Foam filter element
Fuel tank capacity, l 6.0 6.0 6.5 6.5
2
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
18 1537 - 001 - 20.08.2020