Husqvarna FC 350 2014, Repair Manual

Page: 55 / 242

9
9.12
A
SHOCK ABSORBER, SWINGARM
- Mount screw
O
but do not tighten yet.
Guideline
Screw, bottom shock
absorber
• Info
M10 60 Nm
(44.3 lbf ft)
Loctite
®
2701 ™
I
Raise the wheel slightly to make it easier to mount the screw.
- Position the linkage lever.
- Mount and tighten fitting @.
Guideline
I
Nut, linkage lever to angle lever
•
Info
I
M14x1.5
I 80 Nm (59 lbf ft)
I
Raise the wheel slightly to make it easier to mount the screw.
- Tighten screws
O.
Guideline
Screw, bottom shock
absorber
- Tighten fitting (D.
Guideline
M10 60 Nm
(44.3 lbf ft)
I
Nut, linkage lever on swingarm
I
M 14x1 .5
Finishing work
- Remove the motorcycle from the lift stand. (.- p. 10)
Loctite ® 2701 TM
I 80 Nm (59 lbf ft)
Servicing the shock absorber
Caution
Danger of accidents
Disassembly of pressurized parts can lead to injury.
- The shock absorber is filled with high density nitrogen. Adhere to the description provided.
201457-01
Condition
The shock absorber has been removed.
- Remove the spring. (.- p. 54)
- Disassemble the damper. (.- p. 54)
- Disassemble the piston rod.(.- p. 55)
- Disassemble the seal ring retainer. (.- p. 56)
- Check the damper. (.- p. 58)
- Remove the heim joint. (.- p. 58)
- Install the heim joint. (.- p. 59)
- Assemble the seal ring retainer. (.- p. 60)
- Assemble the piston rod.(.- p. 61)
- Assemble the damper. (.- p. 62)
- Install the spring. (.- p. 67)
53