Husqvarna FC 350 2014, Repair Manual

Page: 39 / 242

6
6.28
6.29
FORK, TRIPLE CLAMP
-
Fill the cartridge for at least 15 seconds.
Guideline I
Gas pressure
Info
Watch the pressure regulator dial.
I
1 .2 bar (1 7 psi)
Ensure that the cartridge is filled to the specified pressure.
-
Close the valve.
-
Close the nitrogen bottle.
-
Remove the special tool.
-
Mount and tighten filling screw @ with the O-ring.
Guideline
Nitrogen filling screw of the fork leg M4x0.5 2.5 Nm
(1.84 lbf ft)
Greasin the steerin head bearin
�
f9 !l,
a
800010-10
-
Remove the lower triple clamp. (,.... p. 37)
-
Install the lower triple clamp. (,.... p. 38)
Removing the lower triple clamp
Preparatory work
-
Raise the motorcycle with the lift stand. (,.... p. 10)
-
Remove the front wheel. (,.... p. 92)
-
Remove the fork legs. (,.... p. 14)
-
Remove the start number plate. (,.... p. 89)
-
Remove the front fender. (,.... p. 89)
Main work
-
Take off cable holder
O
in front of the left radiator.
-
Remove screw
8.
-
Remove screw
@).
-
Take off the top triple clamp with the handlebar and set it aside.
•
Info
I
Protect the components against damage by covering them.
Do not bend the cables and lines.
-
Remove O-ring
8.
Remove protective ring@).
-
Take out the lower triple clamp with the steering stem.
-
Take out the upper steering head bearing.
37