Husqvarna FC 350 2014, Repair Manual

Page: 32 / 242

6
FORK, TRIPLE CLAMP
- Mount rebound shim stack (3.
Info
30
Align triangular plates
(i)
exactly with the openings of the rebound piston.
Assemblin the cartrid e
Info
- Mount and tighten new nut @ with the collar facing downward.
Guideline I
Rebound nut
• Info
I
Do not twist the triangular plates!
- Secure the nut by locking.
- Take out the piston rod.
I
M6x0.5 I 5 Nm (3.7 lbf ft}
The steps are identical for both fork legs.
200847-10
200884-10
200882-10
Preparatory work
- Check the fork legs. (,... p. 24)
- Assemble the screw cap with the membrane holder. (,... p. 28)
- Assemble the piston rod. (,... p. 29)
Main work
- Lubricate and mount 0-ring
O.
I
Lubricant (T158) (
,...
p. 219)
- Mount the spring and 0-ring on check valve fj.
I
Lubricant (T158) (
,...
p. 219)
- Mount the check valve with the special tool.
I
Tweezers (T14033) (
,...
p. 233)
- Mount guide ring
@).
- Mount spring guide
C,
and ring
0.
- Clamp the cartridge in a bench vise.
Guideline I
Use soft jaws.
- Push the piston rod into the cartridge.
• Info
I
Check that the piston ring is correctly seated.
- Slide washer (3 onto the piston rod with the open side forward.