Husqvarna Designer Diamond, User Manual

Page: 64 / 134

1
2
4:16 4:16
Sewing
1. Sewing direction for satin stitch buttonholes sewn with the
Sensor One-Step Buttonhole Foot.
2. Sewing direction for buttonholes without satin stitches or
satin stitch buttonholes sewn with presser foot C.
• Step on the foot control. The Sensor One-Step
Buttonhole Foot lowers automatically. A straight
stitch is sewn away from you stabilizing the left
buttonhole column, then the satin column is sewn
toward you. This is repeated for the right column.
The bartacks are automatic (see illustration 1). Keep
the foot control depressed until the Selective Thread
Cutter cuts the threads and the Sensor One-Step
Buttonhole Foot is raised.
When sewing buttonholes without satin stitches
or when using presser foot C, the sewing steps
are different (there is no straight stitch step). See
illustration 2.
Manual buttonhole
To sew a manual buttonhole, use buttonhole foot C.
• Sew the À rst column as long as you want the
buttonhole to be.
• Touch the reverse button. The machine sews the
bartack and the second column.
• When the columns are aligned, press the reverse
button to sew the second bartack.
Note: If you are sewing buttonholes in a very narrow area, snap on
the standard foot C.
Note: In your accessory tray there is a special hook where you can
hang your Sensor Buttonhole foot (see picture 1 and 2).