manualshive.com logo in svg

Husqvarna Designer Diamond, User Manual

Share
Download
Husqvarna Designer Diamond User Manual Download Page 21

A

B

C

2:3

Set Up

 Adjustable E LIGHT™

Your machine has  LED lights which distribute the light 
evenly over the sewing area and eliminate shadows. You can 
adjust the intensity and color of  the light in the  SET Menu. 

  Free arm

To use the free arm, slide off  the  accessory tray. When 
attached, a hook keeps the accessory tray locked to the 
machine. Remove the tray by sliding it to the left.

 

 Thread cutter

There are three thread cutters on your machine. The 

À

 rst 

one is close to the  bobbin winder spindle (A) for cutting 
the thread before and after winding. The second one is 
next to the  bobbin area (B) for cutting the bobbin thread 
after placing it in the machine. The third one is on left side 
of  the machine (C) for manually cutting top and bobbin 
threads. Pull both threads into the cutter from the back to 
the front and pull down quickly.

Summary of Contents for Designer Diamond







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands