Husqvarna Designer Diamond, User Manual

Page: 10 / 134

1:10
Getting to know your machine
Edging Foot J
This foot is used for overcasting and seam/overcasting, with
stitches that have a stitch width of 5.0 and 5.5 mm. Stitches form
over the pin which prevents puckering at the edge of the fabric.
Quilter’s 1/4” Piecing
foot P
This foot is used when piecing quilt blocks. The foot has distance
guidelines marks 1/4" (6 mm) and 1/8" (3 mm) from the needle.
Embroidery/Darning
Foot R
This foot is used for free motion embroidery/quilting/stitching
and hoop embroidery.
7
Side Motion Foot S This foot is used for side-motion/Omnimotion stitches.
7
Decorative Stitch
Foot B Transparent
A clear foot for decorative sewing ma kes it easy to match stitches.
Same tunnel on the underside as Presser Foot B.
7
Sensor One-Step
Buttonhole Foot
Plug into the machine then enter the desired buttonhole length to
sew Sensor One-Step Buttonholes. The middle mark measures a
5/8" (15 mm) from fabric edge.
Self-Adhesive Glide
Plates
Used for Presser Foot C/Sensor One-Step Buttonhole Foot when
sewing buttonholes on plastic-coated fabrics, leather, etc.