manualshive.com logo in svg

Husqvarna Designer Diamond, User Manual

Share
Download
Husqvarna Designer Diamond User Manual Download Page 59

7

4:11

4:11

Sewing

 Overcast

Overcast fabric edges to prevent fraying and to help 
them lay 

Á

 at. It is easiest to overcast before the garment 

is sewn together. Presser foot J is recommended for light 
and medium weight fabric to prevent puckering along the 
edge. Presser foot B is used for heavy weight fabric. Your 
Exclusive SEWING ADVISOR™ feature will select the 
best stitch length and stitch width for the fabric weight 
and recommend the presser foot and needle. 

FABRIC

:

 Woven medium.

SELECT

:

 Woven medium fabric and Overcast technique. 

(The Exclusive SEWING ADVISOR™ feature selects a 
three-step zigzag stitch.) 

USE

:

 

Presser foot J and size 80 needle as recommended. 

Place the edge of  a single thickness of  fabric under 
presser foot J with the wire guide along the edge of  the 
fabric. The three-step zigzag stitch sews over the wire 
guide to keep the edge of  the fabric 

Á

 at.

SEW

: 

• 

Step on the foot control. The presser foot lowers 
automatically.

• 

Sew to overcast the edge of  the fabric.

• 

Touch the Selective Thread Cutter.

Note: It is not necessary to overcast leather or vinyl because they 
do not fray. However, the Exclusive SEWING ADVISOR™ 
feature allows you to, if  desired. Select Leather/Vinyl fabric and 
Overcast technique on your Exclusive SEWING ADVISOR™ 
feature. (The Exclusive SEWING ADVISOR™ feature selects a 
zigzag stitch).

Summary of Contents for Designer Diamond







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands