Husqvarna 520iHE3, Workshop Manual

Page: 31 / 59

31 – English
Repair Instructions
9.6 Dismantling the motor
1
Dismantle the cutting unit and gear package ac-
cording to 9.2 Dismantling the gear package on
page 26
2
Loosen the circlip using circlip pliers.
3
Dismantle the motor by pulling the flywheel and the
motor out of their mounting on the bevel gear body.
9.7 Assembling the motor
1
Always use a new circlip.
The pinion gear and the motor are connected and
must be replaced as one unit.
Assemble the motor by pulling the flywheel and the
motor into their mounting on the bevel gear body.
2
Use circlip pliers to fit a new circlip.
3
Assemble the cutting unit and gear package ac-
cording to 9.4 Dismantling and assembling the
cutting unit on page 30