Husqvarna 520iHE3, Workshop Manual

Page: 37 / 59

37 – English
9.10 Dismantling the shaft and motor
cabling
1
Dismantle the trigger guard, handle, battery hous-
ing as described in 9.1 General repair instructions
on page 26.
2
Dismantle the clamp holding the shaft.
Unplug the connector for the control unit and to the
transport sensor.
The shaft will now come loose from the battery
housing.
3
Dismantle 9.2 Dismantling the gear package on
page 26.
Assemble 9.3 Assembling the gear package on
page 28.
Assemble in reverse order.
9.11 Dismantling the main switch
For products with S/N: –20180400173 (LiHE3).
1
Dismantle the control handle as described in
7 Basic dismantle/assembly on page 20.
2
Dismantle the throttle trigger lock and throttle trig-
ger as described in 8.1 Dismantling the throttle
trigger lock and throttle trigger on page 24.
3
Lift out the main switch and disconnect cable (A).
4
Take loose the contact (C) using a small screw-
driver to carefully free the catches (D) on each end
of the contact and main switch from each other.
NB! Do not pull the wires. Take special care to
avoid damaging the contact (D).
A
C
D
D
Repair Instructions