Husqvarna 325HDA, Workshop Manual

Page: 11 / 40

11
3
Fit the starter.
502 71 14-01
Fuel system
Max speed, modification
325HS75, 325HS99, 325HE 2, 325HE 3, 325HE 4:
Model 325HS has an ignition system with speed control set at 11,600 rpm.
Models 325HDA and 325HE have an ignition system with speed control set at
10,000 rpm.
Use the tachometer 502 71 14-01 to check the speed.
If the speed is too low, check that the cutting equipment does not jam.
Assembling the cylinder cover
325HS75, 325HS99:
Fit the cylinder cover, see the instructions under chapter 2 Ignition system.
NOTE!
Risk for incorrect assembly.
The ignition cable can be damaged by the flywheel if incorrectly routed. The
protective casing on the ignition cable must be clamped in the securing ear (to get
sufficient length of ignition cable to the wedge shaped cut-out).
If the wrong screw is placed in the hole closest to the gearbox the threads in the
clip set will be crossed.
Pull the starter handle a little so that the
starter falls into place and position the
screw by the starter handle to secure.
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com