28
8
504 90 00-02
4 mm
Exhaust system
Deviations:
325HS75, 325HS99
Spacer for the muffler is not fitted on
the brushcutter.
General
See Brushcutter 325.
NOTE!
Make sure the spacer does not fall
down when the muffler is removed.
Remove the muffler.
Remove the two screws holding the
muffler guard.
Dismantling the muffler
325HS75, 325HS99
Remove the muffler guard.
Remove the two screws holding the
muffler.
The exhaust system is an important part of a two-
stroke engine to maintain the right engine power.
It is therefore tuned at the factory to dampen the
noise and give the best engine power.
When running with a too rich fuel mixture the
muffler will be blocked by the residual deposits,
which can mean that a sufficiently high speed is
not attained, and the engine power drops.
Even if the muffler does not have sufficient inner
resistance, the engine power can drop at the same
time as the engine noise increases.
Change the muffler if the exhaust noise is
abnormal.
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
Summary of Contents for 325HDA
Page 2: ...2 For Husqvarna Parts Call 606 678 9623 or 606 561 4983 www mymowerparts com ...
Page 4: ...4 For Husqvarna Parts Call 606 678 9623 or 606 561 4983 www mymowerparts com ...
Page 12: ...12 For Husqvarna Parts Call 606 678 9623 or 606 561 4983 www mymowerparts com ...
Page 30: ...30 For Husqvarna Parts Call 606 678 9623 or 606 561 4983 www mymowerparts com ...
