www.PyleUSA.com
10
www.PyleUSA.com
11
4. HOW DO I ADJUST THE SIZE OF MY HELMET AND FITS ME CORRECTLY
The
Wireless BT Smart Skate Helmet
you have just purchased provides protection,
whether on or off the road. To insure proper use of this helmet, familiarize yourself with
its features, fit and care by carefully reading through this manual before wearing your
new helmet.
Protection and Ventilation
The outer shell allows the helmet to be rated one of the lightest helmets while providing
excellent durability and integrity. The multiple vents with inner air channels draw the air
through the helmet and over the brow for maximum cooling.
Pad Fitting
The helmet must fit properly to be effective. With a proper fit, the helmet will not move
back and forth or side to side while fastened. If the helmet does not fit with installed
pads, simply remove them and install a different size pad. To insure the proper fit, mix and
match the pad thickness to best conform to your head shape.
Retention System
This
Wireless BT Smart Skate Helmet
uses a quick-release buckle that is simple and can
be buckled and unbuckled without changing the adjustment.
The straps must be snugly and evenly tensioned. Place the helmet firmly on your head
and fasten the buckle.
Notice which strap is loose. Tighten the loose strap after removing the helmet.
To tighten the chin strap, hold the buckle with one hand.
Then pull the excess strap in through. (See Diagram A).
To tighten the rear strap, pull excess from the rear of
strap 2. Hold the helmet with one hand.
With the other hand, hold the strap where they pass
under your chin. Then pull from side to side to
balance the length of all four straps. (See Diagram B)
The helmet must sit firmly and level on your head.
(See Diagram C)To lower the front of the helmet to
cover your forehead, tighten the chin strap and
loosen the rear strap. To raise the front,loosen the
chin strap and tighten the rear strap. To check fo proper
tension, put on the helmet and fasten the buckle.
