www.PyleUSA.com
8
www.PyleUSA.com
9
Note:
If the helmet does not follow the key strokes, a tiny red LED near the button you
press flashes quickly. In this case, please check whether the helmet and the remote
control not paired or the helmet is out of power.
Red LED near button flashes during charging, and turns off when fully charged.
3.2 OPERATING A HURTLE SMART TURN SIGNAL HELMET
1.
Turn on the smart helmet:
Press the left, right or straight button on the remote control.
2.
key:
Turn off the helmet. Please hold button on the remote control for 2 seconds.
3.3 OPERATING A HURTLE SMART WIRELESS BT HELMET
1.
Answer a call:
When there is an incoming call, you can press
the M button on the chin strap or operate on the phone to
answer the call.
2.
Reject a call:
When there is an incoming call, you can hold the
M button on the chin strap for 3 seconds or operate on the
phone to reject the call.
3.
Start a call:
When double click the M button on chin strap, you will be calling the last
record on your contact history. You need to operate on the phone if calling other
numbers. (if you have a voice assistant in the phone, press M button for 2 seconds to
reach the assistant and get help from it for calling.
4.
End a call:
Press the M button on chin strap or operate
on the phone to end a phone conversation.
5.
Volume control:
During the phone call or listening to
music, speaker volume can be adjusted. Hold the + or
– button to turn the volume up or down.
Note:
The volume of music and that for phone
conversation are independent to each other.
When music volume is loudest, the phone call
might not, need to adjust separately.
6.
Music Play:
During music play, press + or –button
once to change the song to be next or previous one.
