www.PyleUSA.com
6
www.PyleUSA.com
7
2.2 WIRELESS BT FUNCTION
Get the helmet fully charged first.
Then, please follow below procedures to pair the
Wireless BT Smart Skate Helmet
with your mobile
phone.
1. Press the M button on chin strap until red and blue
LED flashes alternatively (the red LED lights up first,
means the helmet is on, but Wireless BT is not on).
2. Now turn on the Wireless BT function of your smart
phone and try to connect Wireless BT equipment
named as “
HURSHL10 or HURSHL18
”.
3. When successful connected, you will hear a voice
reminder says: your headset is connected, and the
blue LED flashes every 4 seconds as confirmation of
the successful pairing.
4. If the helmet stand by for 10 minutes without successful connection, it will go off
automatically.
3. USER INSTRUCTIONS
3.1 REMOTE CONTROL
1. Fix the fastening base on the steering
bar with the cable ties, as shown in
image *5.
2.
Turn on the Smart Helmet:
Press the
left, right or straight button.
3.
Blinker left:
Press the left button if you
want to turn left. The blinker on the left of
the helmet turns on and back to straight
indication status automatically after 20 seconds.
4.
Blinker on the right:
Press the right button if you want to turn right. The blinker on the
right of the helmet switches on and back to straight indication status automatically
after 20 seconds.
5.
Straight:
The straight button switches the lighting back to going straight status, for
example; in turning status, use it when you want to cancel the turn signal status beforehand.
6.
key:
Turn off the helmet. Please hold the button for 2 seconds.
*5
