www.PyleUSA.com
4
www.PyleUSA.com
5
1. GENERAL INFORMATION
This helmet is a high-quality protection for cyclists, skaters and scooters.
EN 1078 / CPSC:
This helmet is intended only for pedal cyclists. It is not designed for motor vehicle use or
other sports. If your helmet bears a CPSC designation it meets the CPSC Safety Standard
for bicycle helmets. If your helmet bears a CE 1078 designation it meets the CE requirements
of a helmet intended for pedal cyclists. If your helmet bears an AS/NZ 2063:28 designation
it meets the bicycle helmet standard for Australia and New Zealand.
2012 Europäische Norm von Helmen für
Rad-fahrer und für Benutzer von
Skateboards und Rollschuhen.
WARNING!
This helmet should not be used by children while climbing or doing other activities when
there is a risk of strangulation/hanging if the child gets trapped with the helmet.
2. CHARGE, WAKE UP AND CONNECT
Please refer to the function that your helmet has.
2.1. TURN SIGNAL FUNCTION
A.
Please charge the helmet (like shown in image *1) for about 4 hours, turn signal
indicators stop flashing when fully charged.
B.
Please charge the remote (like shown in image *2) for about 2 hours. The red LED
indicator stops blinking when fully charged.
Your Wireless BT Smart Skate Helmet is still in sleep mode (Battery Safe Mode), this is
because of no using in 1 week. Press the reset button on the helmet with a needle as
shown in image *3.
All the LED lights on the helmet flash quickly.
At this time, press the reset button the remote control as shown in image *4.
Now the helmet is standby.
*1
*2
*3
*4
