SAFETY
Maintenance and Storage
• Keep all parts in good working condition and all hardware tightened.
Replace all worn or damaged decals.
• Keep all nuts and bolts tight, especially impeller attachment bolts, to be
sure the equipment is in safe working condition.
• Check brake operation frequently. Adjust and service as required.
Prevent Fires
• Remove debris from engine compartment and muffler area,
before and after operating machine, especially after blowing in dry conditions.
• Always shut off fuel when transporting or storing machine, the machine
has a fuel shutoff.
• Do not store machine near an open flame or source of ignition, such as a
water heater or furnace.
• Check fuel lines, tank, cap, and fittings frequently for cracks or leaks.
Replace if necessary.
Tire Safety
Explosive separation of a tire and rim parts can cause serious injury or
death:
• Do not attempt to mount a tire without the proper equipment and
experience to perform the job.
• Always maintain the correct tire pressure. Do not inflate the tires above
the recommended pressure. Never weld or heat a wheel and tire
assembly. The heat can cause an increase in air pressure resulting in a
tire explosion. Welding can structurally weaken or deform the wheel.
• When inflating tires, use a clip-on chuck and extension hose long
enough to allow you to stand to one side and NOT in front of or over the
tire assembly.
• Check tires for low pressure, cuts, bubbles, damaged rims or missing studs
and nuts.
Handling Fuel Safely
To avoid personal injury or property damage, use extreme care in
handling fuel. Fuel is extremely flammable and fuel vapors are
explosive:
• Extinguish all cigarettes, cigars, pipes, and other sources of ignition.
• Use only an approved fuel container. Use only non-metal, portable fuel
containers approved by the Underwriter’s Laboratory (U.L.) or the
American Society for Testing & Materials (ASTM). If using a funnel, make
sure it is plastic and has no screen or filter.
9
