STORAGE
Storing Machine Safety
Engine storage:
1. Change engine oil and filter while engine is warm.
2. Service air filter if necessary.
3. Clean debris from engine air intake screen.
4. Remove spark plugs. Put 1 oz of clean engine oil in cylinders.
Install spark plugs, but do not connect spark plug wires.
Crank the engine five or six times to allow oil to be distributed.
5. Clean the engine and engine compartment.
6. Remove battery.
7. Clean the battery and battery posts.
8. Close fuel shut-off valve.
9. Store the battery in a cool, dry place where it will not freeze.
NOTE: The stored battery should be recharged every 90 days.
10. Store the vehicle in a dry, protected place.
NOTE: Put a waterproof cover over on machine if stored outside.
Removing Machine From Storage
1. Check tire pressure.
2. Check engine oil level.
3. Check battery. Charge battery if necessary.
4. Install battery.
5. Check spark plug gap. Install and tighten plugs to specified torque.
6. Open fuel shut-off valve.
7. Run the engine 5 minutes at mid throttle with deflectors closed to
allow oil to be distributed throughout engine.
8. Be sure to test all safety systems before operating.
48
