EN
2
1.
TECHNICAL SPECIFICATIONS
Model
HKN-V333
HKN-V335
Overall dimensions, mm
408*201*87
422*224*92
Generating capacity, kW
0.12
Electrical network parameters
220–240 V/50 Hz
Pressure, kPa
Up to -68 kPa
Up to -80 kPa
Maximum width of the sealed seam, mm
300
Knife included for cutting packages
Yes
Weight, kg
2
2.9
The Manufacturer reserves the right to change the appearance and design of the machine in
order to improve its operational characteristics, while leaving its technical characteristics un-
changed.
2.
INSTALLATION AND SETTING-UP
• Attention! All installation and commissioning work should be carried out by skilled technical
personnel.
• Make sure that the mains voltage corresponds to the operating voltage of the machine, check
the installation of protection devices, and make sure that they conform to the respective power
and characteristics ratings.
• Protection equipment should be located in the immediate vicinity of the machine or in the
switchboard if the latter is directly accessible. The socket should meet the safety requirements
and have reliable grounding.
• The electrical wiring should conform to the rated power of the machine. Non-conformity may
result in fire.
• Loosening of the fasteners of the components, electrical connections and moving mecha-
nisms might occur during transportation of the unit, so these shall be checked before the first
start.
• Before using, remove all packaging materials from the surfaces of the machine and chamber.
• Before the first use, clean the equipment according to the instructions in Section 6. Mainte-
nance and Care.
• Do not allow the cable to be placed between objects and furniture that may exert pressure
and damage the power cable. Do not bend or tangle the cable. The cable should not be located
near heat sources.
• Do not use household extension cords to connect the machine.
• Improper wiring or plug/socket malfunction may result in fire.
• The machine is not intended for outdoor use.