EN
6
INTRODUCTION
HELLO!
Thank you for choosing our equipment! Before you start using it, you must familiarize yourself
with this Manufacturer's Certificate, which should be kept for the entire service life of the
equipment.
! This equipment is intended for use in public catering enterprises.
ATTENTION!
1.
This device must be grounded before use.
2.
Ensure that no water gets on the heated glass surfaces during cooking.
3.
Do not use a sprayer to clean the device.
Hurakan electric rotisseries for cooking chicken are distinguished by their advanced design, so-
phisticated structure, ease of use, quick heating and energy savings. The rotisserie door is made
of heat-resistant glass, which can withstand temperatures above 300
℃
. The rotisseries have
an internal light that helps you to monitor the quality of food during cooking. They can also be
used as a rotating display case for barbecue products.
MAIN PARAMETERS
Model
Voltage
Power
Capacity
Dimensions
HKN-OGE12
220 V
4.5 kW
8-12 chickens
810x630x610
HKN-OGE16
220 V
6 kW
12-16 chickens
1010x630x880
TRANSPORTATION AND STORAGE
Products should be shipped with caution, avoiding strong vibrations. Shipping containers do
not provide for prolonged outdoor storage. Do not overturn the device. If temporary outdoor
storage is required, measures must be taken to protect the device against rain.
INSTALLATION
1. The electric rotisserie for cooking chicken should be placed on a stable surface, at a distance
of at least 10 cm (on the right and left) from non-combustible materials. There must be a dis-
tance of at least 20 cm between the back of the device and the wall.
2. The mains voltage must correspond to the voltage on the nameplate of the product.
3. Appropriate equipment and accessories must be installed, such as the mains switch, fuses
and short-circuit protection devices, and other switches.
4. An equipotential junction box is located under the rotisserie at the back. A copper wire with
a diameter of at least 2.5 mm must be connected to it.
5. The grounding wire (yellow-green) and power leads must be connected to the same box.
The grounding wire must be safely and securely fastened with copper bolts.
6. Before connecting, all electrical parts and grounding must be checked.
