HURAKAN HKN-MD05, Manual

Page: 5 / 31

EN
5
Main parts and components
HKN-MD05:
1. Upper casing
2. Side panel
3. Legs
4. Thermostat
5. "On/off" switch
6. Timer
7. Heating element
8. Crumb tray
9. Wire baking rack
HKN-MD0505:
1. Lower chamber
2. Upper chamber
3. Lower thermostat
4. Lower "on/off" switch
5. Timer
6. Upper thermostat
7. Upper "on/off" switch
8. Upper casing
9. Side panel
10. Legs
Operation
1. Turn on the power supply (plug it in).
2. Turn the switch to the "on" position.
3. Set the knobs of the thermostats to the desired temperature. The light indicator should light
up to indicate that the heating elements are switched on. When the set temperature is reached,
the thermostat will automatically turn off the power supply and turn it on again when the
temperature starts to drop, thereby controlling the temperature. The light indicator will light
up and go out.
4. After the initial heating and turning off the warning lamp, wait 10-15 minutes for the
chamber to warm up evenly.
5. If necessary, set the timer to the required time value.
6. After completing the operation, turn the thermostats to the minimum value, turn the timer
to the value "0", then turn the switch to the "off" position.
7. Disconnect the equipment from the power supply.